Architectural film is installed fast, without noise, dirt, and dust.
1If needed, create a smooth, flat surface using putty followed by light sanding.
2Apply the primer if needed on the surface and apply around edges and corners, lightly sand when dry.
3Measure and cut architectural film.
4Peel off and pull the release backing about 4 inches and firmly attach the film, repositioning as needed until properly aligned
5Using a squeegee held at a 45 degree angle, firmly adhere the film from top to bottom using a fan-shaped sweeping motion
How to install architectural film. Explore more in our Beginner’s guide.
Complete installation manual
Leave us your email and we will send you the manual shortly
Do you want to become a Bodaq certified installer? Contact us
Subscribe to our helpful Newsletter
Subscribe to our Newsletter
